Advertising

Sunday, March 5, 2017

Mistakes To Avoid When Doing Screen Printing Denver

By Catherine Schmidt


In order to discover the secret of the perfection of perfection, you need to exercise a lot of patience and do a lot of practice so as to master the art. Screen Printing Denver is not different from the rest of art. There are times even when the most skilled persons realize they have made mistakes even some that can be avoided.

There are some mistakes in screen printing that should not be assumed. This is my because they could cause severe damage to the identity of the brand especially when they are not pointed out in time. However light as it seems, this could cause huge financial loss. Therefore, below are some of the common errors made by printers that should be avoided at all cost.

Using too much ink is one of the things that you should watch out for. This could be because of either using a lot of product on the commodity or even that the ink is too thinned you. That is the reason that it is advisable for you to test the ink on a few test sheets so that you can be sure of the quality. If you find it is too much, then you need to use less pressure when doing a print.

Using less ink is also a problem. When copying on surfaces such as seams and collars, you ought to strive to use plates covered in neoprene fabric, or you could also try to print on a softer base. In other cases, you might find that the scene you are using could be clogged. You should, therefore, try rubbing the underside using a wet towel and after that try out a screen test paint to make it clear out.

Make sure the client has seen the samples and approved before you get into the full printing of the final copies. Simple mistakes like misspelling a word can cost you a lot if you have to undo the whole print because of that. Prove read your work and let the client also confirm that everything is as it is supposed to be.Be careful with the art and make sure your colors are right.

The other mistake that people do is not to take the time to master the squeegee angle mastering of the position of the squeegee takes practice and experiment. Once you have found the right angle, strive to be consistent. The strokes that you use are also essential. Since there are two types the push and pull, whichever you decide to use, stick with it and do not change between the strokes. If inconsistent, you will have a work that is poorly done.

Make sure you d not ignore the tightening of the screen because it may cause movement of the plate. Turn the screen until you are sure it is tight enough. The plate should also have strong adhesive so that the shirt does not keep moving. Otherwise, you may have poor production.

Watch out for these common mistakes when you print. However, though the task might seem to be difficult at first do not forget that practice makes perfect and with time, you will be able to do the procedure with ease.




About the Author:



No comments:

Post a Comment